Vzone Graffiti 220W utilizes the most advanced chipset HW Board 1.0 with a range 7 to 220W. It is easy to operate with NI.TI.SS temperature control mode and TCR function , support 0.05-3ohms, and fast USB charging. The ergonomic and distinctive graffiti design integrates fine finishing bracket in 2 tone colors for better grip and the 0.91'' OLED screen with large button on the side.
Vzone Graffiti 200W mod —— a powerful, feature packed and attractive looking dual 18650 battery device. Manufactured from Aluminium Alloy, three unique and attractive looking graffiti designs are available with the VZone Graffiti 220W, making its looks stand out from the crowd. An advanced HW Board 1.0 chip packs up to 220W of output power in variable wattage mode, and Ni200, Titanium, Stainless Steel and TCR modes are also present for temperature control users!
90mm x 56mm x 26mm dimensions
Takes two 18650 batteries
Distinctive graffiti design
7-220W power output
7.5V max output voltage
50A max output current
Customisable user power output curve mode
Ni200/Titanium/SS/TCR temperature control modes
100-300C/200-600F temperature control range
0.91inch OLED display
Centrally mounted 510 connector
Magnetic battery door cover
The Graffiti 220W is manufactured out of solid aluminium alloy, giving the device a weighty and premium feel about it. With the attractive graffiti styled design on the front and rear panels of the device, combined with the lovely brushed finish on the aluminium, I think that the Graffiti 220W is a great looking piece of kit! It isn't too large for a dual 18650 mod either, measuring in at 90mm x 56mm x 26mm. Three colour options are available, each with an awesome looking graffiti design on the panels.
At the top of the Graffiti 220W is a spring loaded 510 connector which has been placed centrally on the device. At the base of the Graffiti 220W are battery venting holes, meaning that gases can safely escape should the worst happen and batteries vent inside the mod. The battery compartment is accessed by removing the rear panel, which is held on with strong magnets.
The side of the Graffiti 220W has a large fire button, with a 'V' engraved on it, as well as the up and down buttons and USB port for charging. A large 0.91inch OLED screen is also found here, which displays information clearly under any light conditions. The current mode is displayed here, along with the wattage/temperature setting, atomiser resistance, output voltage and remaining battery life.
In wattage mode, VZone Graffiti is able to fire coil resistances of 0.1-3.0ohm, and output power from 7-220W. Output voltage is limited to 7.5V however, meaning that if you do intend vaping at 220W then you would need to use a coil build with a resistance of 0.25ohm or less in order to achieve this. I've found that power delivery is near enough instant after pressing the button, and the vape itself feels pretty powerful!
Temperature control users are well catered for with the Graffiti 220W, preset modes for Ni200, Titanium and Stainless Steel are all present here, and a custom TCR input mode is also available too. The Graffiti 220W reads resistance accurately in temperature control mode from 0.05ohm to 1.0ohm.
Someone who get a full day out of two 18650 batteries with a 0.5ohm coil at 35W said that the battery life is good. When using lower resistance and higher power, battery life does substantially decrease as expected.
VZone Graffiti 220W mod is a solidly built dual 18650 battery device that looks the absolute part, feels really well made in hand and packs plenty of power to boot! There's a lot of features present with this device too.