Vzone’s Simply Squonk Kit is manufactured to be a quality squonking set up that doesn’t break the bank! It has been designed to be a lightweight and portable mechanical squonking kit, and it feels very small and light in hand! the Simply Squonk Mod was constructed from polycarbonate, with frosted gold and frosted ash finishes available. It weighs only 80g, and measures in at a compact 81mm x 27mm x 47.5mm.
A large silver fire button is located to the side of the Simply Squonk Mod, with a relatively short throw. It makes a good connection and does the job! A locking switch is found below the power button, and this will prevent the firing button from making a connection when engaged. We would still recommend removing your battery when not using the Simply Squonk Mod, as any juice leaking from the 510 can cause autofiring issues if it bridges the gap between the button and contact!
The side panel is magnetic, and the magnets holding the panel on are surprisingly strong, and large cut outs allow you to push your Squonk bottle to feed juice up to your RDA, and a second cut out makes your battery partly visible and acts as a large vent hole.
Contacts inside the Simply Squonk Mod are copper and silver, which are both widely used in many mechanical squonking mods. As standard, the Simply Squonk Mod accepts either a 21700 or 20700 battery, with an adaptor included so that you can use 18650 batteries.
The type of squonking bottle that comes with many budget squonkers can be a sticking point for many potential buyers, but we are pleased to report that the Simply Squonk Mod bottle works great! It holds 5.5ml of juice, and has the same feel and responsiveness as some of its more expensive counterparts.
Also found within the Simply Squonk Mod is the Simply Squonk RDA, which features a silver plated base and deck as well as a yellow PEI topcap. A wide bore drip tip is pre-installed with the RDA, which can be swapped over for another one of your choice.
Airflow is located at the base of the deck, two very large airflow slots are found at either side, and these can be tightened down by rotating the topcap. A two post deck is found here, with plenty of room to build and large post holes for mounting large and exotic coil builds. You also have the option of switching one of the post screws from the side to the top of the post, opening up more rebuilding options.
The Simply Squonk Mod is a fully mechanical squonking mod, so you need to have an understanding of ohms law and battery safety here. It does hit very well, as you would expect from a fully mechanical squonker, and as long as you regularly clean the contacts it will continue to hit hard! Simply put, the VZone is a good entry level squonking kit for someone who wants to give mechanical squonking a try.